5-Second Nozzle Swap! Four-Nozzle K3 Arrives – Creality’s Ecosystem Showcase-3DPTimes

Home > News

5-Second Nozzle Swap! Four-Nozzle K3 Arrives – Creality’s Ecosystem Showcase

September 1, 2026 News 8980

On August 26, 2026, at Formnext Asia in Shenzhen, China, Creality dropped a bombshell with the public debut of its K3 multi-nozzle 3D printer.

Powered by KliTek™ technology, this machine directly tackles the long-standing headaches of slow filament swapping and inefficiency in multi-color printing.

The live demo was seriously impressive: four nozzles working in tandem, with a nozzle change taking less than 5 seconds and a full set of filaments swapping out in just 15 seconds. Compared to traditional single-nozzle setups, multi-color printing speed jumped nearly 50%, while material waste was cut by about 85%. Even more striking – when printing 95A TPU flexible filament, the speed rocketed from the usual 2–3 mm³/s all the way up to 15 mm³/s, giving efficiency a several-fold boost.

But speed isn’t the only trick up the K3’s sleeve – it’s also smart. From RFID-based filament recognition and automatic profile matching, to AI-powered monitoring for clogs and stringing, the whole process runs with minimal hand-holding. You can check progress remotely via the mobile app anytime. In short, this combo has significantly lowered the barrier to entry for consumer-grade multi-material printing.

The booth wasn’t just about the K3, though. For farm-style batch production, the Ender-3 V3 Mega offers a generous 42 cm build volume and handles 85A ultra-soft TPU with ease – built tough and ready for heavy use. On the more user-friendly side, the SPARKX i7 brings AI tuning and auto-calibration, making it a breeze even for complete beginners.

Over in the resin printing corner, the HALOT-X1 Max flexed its muscles with large-format precision casting – a 16K optical engine paired with AI residue detection, making it a solid choice for figure production. Meanwhile, the palm-sized PioNext Mini focused on dental applications, completing a ceramic crown in just 10 minutes – drawing plenty of attention from professionals on site.

Completing the ecosystem was a major highlight too. The pocket-sized Pika scanner is all about portability – scan on the go, anytime. The Falcon laser engraver is a multi-tasker, even capable of color metal engraving. And the M1/R1 filament recycling system turns waste and failed prints back into reusable material, closing the loop. The booth also featured 3D-printed shoes, giving a tangible glimpse of how this tech can translate into real-world products.

From scanning and printing to recycling, Creality is building a full-fledged "creation ecosystem." The show runs until August 28 at Hall 15, Booth D111 of the Shenzhen World Exhibition & Convention Center – if you want to see these machines in action, you still have time.