CREALITY Goes Big at IFA, K3/i8 Take the Stage-3DPTimes

Home > News

CREALITY Goes Big at IFA, K3/i8 Take the Stage

September 16, 2026 News 9469

From September 4 to 8, 2026, at IFA 2026 in Berlin, CREALITY staged the global debut of its new multi-color printer, the SPARKX i8, and previewed its upcoming flagship, the K3.

The K3 and the desktop filament generation system M1&R1 both won IFA Innovation Awards, while the K3 also earned the GADGETY AWARDS "BEST OF IFA-HONOREE," making it clear that these products are packed with serious technical value.

The K3 is built around CREALITY's in-house KliTek™ multi-nozzle system: four nozzles work together intelligently, nozzle changes take under 5 seconds, filament changes take no more than 15 seconds, multi-color efficiency increases by nearly 50%, and filament waste drops by about 85%. Paired with the S-Drive™ dual-drive feeding system, it can reliably print 80A–95A TPU, allowing multi-color, multi-material parts to be formed in one piece.

The SPARKX i8, meanwhile, brings multi-color printing closer to the mainstream. Its QuarTeks™ four-channel extrusion system is integrated into a single printhead, enabling "four colors from one head." By shortening the retraction and feeding paths, it reduces flushing waste and boosts multi-color efficiency by up to 500%. Connected to the CREALITY Cloud AI ecosystem, users can upload a photo and automatically generate a 3D model, with less modeling and fewer manual slicing tweaks—much closer to true out-of-the-box printing.

Also on display was a full-chain ecosystem: the Ender-3 V3 Mega demonstrated large-format, high-speed printing with a 420×420×420 mm build volume and 500 mm/s speeds; resin printers such as the HALOT-X1 Max covered 16K resolution, a temperature-controlled chamber, and AI inspection; the Falcon A1C and T1 expanded into laser engraving; the Pika and Sermoon P1 covered portable and professional 3D scanning; and the M1&R1 handled filament recycling with about 1 kg/h throughput. A claw machine and a 3D-printed drum kit on site made creation even more fun.

From hardware to AI, software, materials, and content ecosystem, CREALITY is pushing 3D printing from a geek tool toward mass-market creation.